With higher output stoves comes slightly more complex design, and with more complex design comes a higher chance of things going wrong, same can be said of the fancy features we have in vehicles nowadays.
When it comes to Coleman stoves the solution is simple, carry a spare stove regulator assembly with you on your adventures and in the instance of damage, dirt or the rare case of the part failing, you'll have a backup to get you up and cooking again.
Of all the parts on the Coleman Regulated stoves, the regulator is the most likely part to fail over time, a spare one of these is cheap insurance for hot meals every night.
Suits HyperFlame and Eventemp Stoves
Replaces regulator assembly that comes with the stove
Carry a spare in case of damage or failure
Packed Dimensions:
21L x 6.5W x 4.5H cm
Weight:
Material:
Alloy | Brass
Gas Fitting to Appliance:
Coleman Specific
Gas Fitting to Bottle:
Coleman/BOM/UNEF
Warranty:
1 Year
Supplier Code:
1219960
Snowys Code:
125566
Reviews
(7)
4.17
Q&A's (11)
Compatible with Peak?1 answer
Is this the replacement regulator for Coleman Peak 1 − 2 Burner Stove also?
Bowen - Keiraville, NSW(2 weeks ago)
G'day Bowen,
Yes this will fit as a replacement regulator arm for the Coleman Peak 1 - 2 Burner Stove.
Kaya - Snowys(1 week ago)
Length of hose for connection1 answer
What is the longest hose that i can safely connect this to? I need a 2m hose rather than the standar 1.5m hose.
Alexis - Edgewater, WA(3 years ago)
G'day Alexis,
The longest hose available for these Coleman regulator assemblies, and their compatible stoves is 1.5m.
Leece - Snowys(3 years ago)
Does this connect propane gas bottle to two burner stove?1 answer
as above
Christine - St Helens(4 years ago)
G'day Christine,
The 2 Burner Stove Regulator Assembly is specific to Coleman stoves and is a spare part to replace the supplied regulator if required. This won't suit any other brand of stove, so if you're wanting to connect a small propane cylinder to another branded stove there may be another option. Please send through an email with the stove you have and we can check the options for you.
Leece - Snowys(4 years ago)
Connect to 9kg gas bottle1 answer
Hi there, what adapter do I need to connect to 9kg gas bottle. Also, do you have replacement jets for 3 burner even temp? (Keep up the good work)
Dave - Altona(4 years ago)
G'day Dave,
If you're wanting to use a 9kg gas bottle with your 3 Burner Eventemp Stove then you'll just need the Coleman COM/UNEF to POL High Pressure Gas Hose which will connect the regulator arm of your stove to your 9kg gas bottle. I can't say we've ever had to get replacement jets for a 3 Burner Eventemp but it is possible they are available. If you're able to swing us an email we can get in touch with Coleman and see what's available for you.
Leece - Snowys(4 years ago)
Coleman regulater3 answers
Does this Coleman regulator and gas canister when on the hyperflame reduce gas compared to a gas bottle.
Peter - Horsham(4 years ago)
G'day Peter,
The Coleman regulator arm needs to be attached to the Coleman stove regardless of if you have a green gas canister or a gas hose connected to a gas bottle. This Arm helps to regulate the gas through to the stove - the knobs on the stove will control the flow of gas to the burner rings.
Susie - Snowys(4 years ago)
So do I need to connect a hose with no regulator when on the gas bottle?
Peter - Horsham(4 years ago)
The Coleman High Pressure Gas Hose will do the trick - you can find the link HERE
Susie - Snowys(4 years ago)
Is this regulator adjustible? 1 answer
The original regulator is fixed and flame adjustment is difficult over a very small knob movement. A reduced gas pressure at the stove would improve flame adjustment/range.
Rob - Tawonga South (4 years ago)
G'day Rob,
The 2 Burner Stove Regulator Assembly is a fixed regulator so unfortunately, you won't be able to adjust the gas flow rate.
Leece - Snowys(4 years ago)
Weber BabyQ?1 answer
Can this adaptor be used to convert a Weber BabyQ from LPG to The Coleman Profane gas bottles?
Steve - Albert Park(4 years ago)
G'day Steve,
Unfortunately, you won't be able to use this regulator assembly to attach your Weber to a Coleman Propane Gas Bottle. We don't sell Webers but I don't believe you can buy anything that will convert this for you sorry.
Leece - Snowys(4 years ago)
Replacement gasket1 answer
Can you purchase a replacement gasket for the stove end of the regulator assembly? Over time it has become hard/brittle and leaks gas making it subject to catching fire.
Phillip - Melbourne(4 years ago)
G'day Phillip,
When it comes to playing around with any gas parts, we recommend having a chat with a licenced gas technician mate. Sorry, but none of us at Snowys wish to risk you causing harm to yourself! Good luck :)
Alexandra - Snowys(4 years ago)
Hi would this fit Primus Deluxe 2 Burner Stove please 1 answer
Hi would this fit Primus Deluxe 2 Burner Stove please Thanks
Mick Sablic - Deer Park Vic3023(5 years ago)
G'day Mick,
This Regular Assembly is designed for use with Coleman stoves such as the HyperFlame and Eventemp so it's not going to be compatible with Primus brand stoves. If you're after a spare part, it's likely that we would be able to source it for you as a special order - if you'd like us to look into that for you, send us an email at service@snowys.com.au or give us a call on 1300 914 007.
Emily - Snowys(5 years ago)
Does this regulator arm suit the Coleman 3 Burner Eventemp Stove?1 answer
Does this regulator arm suit the Coleman 3 Burner Eventemp Stove?
Our Coleman is leaking gas at the regulator connection so could you advise if this is the correct replacement part please?
Michelle - KELLYVILLE(5 years ago)
G'day Michelle,
Good news! The Coleman 2 Burner Stove Regulator Assembly is the exact same part that's used for the Eventemp Stove, so this will suit you fine.
Ben - Snowys(5 years ago)
which hose goes with this regulator to connect to 2 kg gas bottle?1 answer
which hose goes with this regulator to connect to 2 kg gas bottle?
alzina - 6158(5 years ago)
G'day Alzina,
To connect a 2kg gas bottle to your Coleman 2 Burner Stove Regulator Assembly, you'll need a hose with a 3/8" at one end and BOM fitting at the other. The best one for your needs would be this one by Coleman.
