G'day Emily,

Unfortunately, we don't know if these will fit the Glenrowan Swag, as they're no longer in production, and Oztrail hasn't indicated they are compatible. It might be worth trying them out, but unfortunately, we have no way to verify compatibility of these two items.

G'day Joel,

No, the Mitchell Expedition Poles are quite different to the Dusk to Dawn 900 Poles. The Mitchell has 3 different size poles that reduce in length and height to match the swag. The Dusk to Dawn swags are the same height at either end, so you'll need to use the Darche Replacement Poles, you can find them on the Darche Website HERE.

G'day Alex,

Good question, unfortunately, the Wanderer swags are made by another retailer, so it's hard to know if they'll fit. You can find the swag they're designed to fit here, so maybe check it against the dimensions of your swag to work out if it will fit.

G'day Guy,

Unfortunately, it's really tricky to know as Dune is an Anaconda home brand. We'd suggest checking the dimensions of the Mitchell Expedition, and if they're similar you should be ok, but you may need to make some adjustments.

G'day Steve,

I've just measured the poles and they are 145cm, 150cm and 190cm in length. I'm not sure if they will fit or not as we don't sell this swag but you might need to adjust the lengths to suit. Have a read of our guide to repairing broken poles which may help. 

G'day Jack,

As far as we're aware the current model Oztrail Mitchell Expedition Single Pole Kit will fit older model Mitchell Swags.

G'day Kym,

It sounds like this should work for you mate, except one of the poles is a little bit too long. I've just measured them all and they are 145cm, 150cm and 190cm. So you might just need to adjust the length of the shortest pole. Our guide to repairing broken poles should help you get started there. 

G'day Kate,

Sorry but the swag poles are only available in a kit like this. You can also get a little gadget called a pole repair sleeve that you slide over the break like a splint, but they're probably half the price of this kit anyway. We don't have any of these currently but we can track one down for you, just shoot us an email if you want us to look into this option.

G'day Kathy,

I've just called Oztrail and they've confirmed the Oztrail Mitchell Expedition Single Pole Kit will fit the older model Mitchell King Single Swag.

G'day Claire,

I had to take the measurements off of our display model swag as we're currently out of stock of the Oztrail Mitchell Expedition Single Pole Kit. The measurements I took are pretty close but won't be quite 100% accurate, as I was using a tape measure on a curved pole. The head pole was about 190cm, the middle pole was about 160cm and the foot pole was about 145cm.