G'day Darren,

We can't say for sure sorry without trying it in real life, but we can compare your stove's dimensions with those of both the Hyperflames which this bag is designed for.  Your existing stove's pack size is slightly smaller than the Hyperflame stove. Based on that all things point to this stove bag being a great option.
Hope that helps.

G'day Mark,

Im not familier with the Coleman Classic stove, a quick google suggests its either old and discontinued, or a model available overseas.
We cant test it out in real life for you, but you should be able to work this out with the dimensions of your stove.
As this bag is designed for the Hyperflame stove, if your stove is the same size or smaller than either of these, you'll be fine!

G'day Jason,

Yes, these bag dimensions are correct.
The bag itself is obviously made of fabric so has a lot of movement and the ability to mould around the stove.
The measurements on the stove cover the absolute maximum external dimensions, including the 2 small hinges and collapsible handle, etc.
There's no issue with the compatibility of this bag with the Hyperflame stoves, that's what they're designed for.
Hope that helps!

G'day Jeremy,

I actually gave this a try back in April for a Q&A on the stove and I can confirm the Triton Stove fits in the Hyperflame Bag.

G'day Craig,

Yes, the Hyperflame bag will fit the Fyreknight series.

G'day Cindy,

Unfortunately, we don't have a display model of the Coleman Hyperflame Stove Carry Bag to test the fit of your Coleman Dual Fuel Powerhouse Stove however looking at the dimensions of both products, it may be a little tight.

Instead, I tested the fit of the OZtrail 3 Burner Stove & BBQ Plate Bag with that stove and they fit together perfectly. I hope this helps. 

G'day GR,

I ran downstairs quickly just to double check this for you and you're correct, the bag is going to be a bit too small to fit an Eventemp stove so you'll be best to stick with the specific Eventemp carry bag. 

I reckon you could fit them all in the bag, Gareth, but it's a bit of a wrestle, you might cause some damage, and I reckon you'd resign yourself to storing one of them separately. 

I just gave it a try myself, and the full-length plate fits either in the bag under the stove or inside the stove but I'd recommend using a towel or foam to stop it rattling around and getting damaged. It's with the half plate that you're going to run into problems. The drip tray adds too much height for the lid to close with the grill inside the stove (it closes, but not all the way), and it is likely to start causing damage if you jam it in the bag separately from the stove, you've also got to store the removable windshield somewhere if the grill is inside the stove.

If it were me, I'd store the full-length grill wrapped in a tea towel or similar inside the stove and keep the half grill separate.

I hope that helps.

G'day Tara,

I've been down to the shop floor to try this out just to be sure, and it fits perfectly! I think it's probably the best stove bag we sell as it has a reasonable amount of padding, so a great choice for your Companion 2 Burner High Output Stove!

G'day Bill, 

It looks like the FyreCaptain is a US model stove that we don't sell so we can't test it out for you. But from looking at the dimensions and converting it from inches to cm, it looks like the depth is a little bit off so you might run into trouble zipping up the Hyperflame carry bag over your FyreCaptain stove, Bill. 

G'day Ien,

It'll be a tight fit but you should be able to squeeze your Coleman Triton 2 Burner Stove into the Coleman Hyperflame Stove Carry Bag. 

G'day Jake,

I've just double checked this for you and you'll have no issues Fyreknight Stove and Griddle into a Coleman Hyperflame Stove Carry Bag. 

G'day Glen,

I've just run down to the shop floor to try one out for you. I can confirm that the HyperFlame Stove Carry bag does, in fact, fit the HyperFlame FyreKnight Camping Stove. It's probably worth noting that I found it a heck of a lot easier to get the stove to fit nicely in the bag when I had the handle (front) side facing up. When I had it facing down I couldn't quite get it zipped up.